Tapered Roller Bearing Assemblies
Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces.
The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers.
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
- 50 mm x 90 mm x 32 mm FAG 33210 Tapered Roller Bearing Assemblies
- 52100 Steel
- Taper Roller
- 120 mm x 260 mm x 62 mm FAG 31324-X Tapered Roller Bearing Assemblies
- 2.0625 in
- Class 2
- 240 mm x 360 mm x 76 mm FAG 32048-X Tapered Roller Bearing Assemblies
- Brass
- Separable Inner Ring
- 220 mm x 340 mm x 76 mm FAG 32044-X Tapered Roller Bearing Assemblies
- Set Screw
- 48-1/2 in
- 200 mm x 310 mm x 70 mm FAG 32040-X Tapered Roller Bearing Assemblies
- Sleevoil
- Open End Cap
- 280 mm x 420 mm x 87 mm FAG 32056-X Tapered Roller Bearing Assemblies
- 2.6250 in
- 12000 fpm
- NSK 32308J Tapered Roller Bearing Assemblies
- 3.60 N/mm²
- 4.7500 in